Paintball markersBeginner markers · Electronic markers · Pump & mag-fed
Masks & gogglesPaintball masks · Lenses & care
Air systemsHPA tanks · CO2 & filling
Loaders & paintLoaders · Paint & pods
Protection & clothingPads & chest protection · Jerseys & pants
AirsoftAirsoft rifles · Airsoft pistols · Airsoft protection
Beginners & fieldsYour first game · What to buy first
Bags & maintenanceGear bags & cases · Marker care
  1. Home
  2. Buying guides
  3. Paintball HPA Tank Sizes Chart
Air systems

Paintball HPA Tank Sizes Chart: 45, 50, 68, 77 and 90 Cubic Inches

Compare Ninja's published HPA tank sizes and pressure rating, then check the marker and regulator requirements.

Quick answer

Ninja lists standard carbon-fiber tank sizes of 45, 50, 68 and 90 cubic inches, and SL2 sizes of 68, 77 and 90 cubic inches. Its pages identify these as 4500 psi rated tank systems. Match the bottle and regulator to your marker.

Read the tank’s volume and pressure rating separately. Ninja lists several 4500 psi rated carbon-fiber tanks, including 45, 50, 68, 77 and 90 cubic-inch sizes across its product families.

Ninja HPA tank sizes

Ninja product family Published bottle sizes Pressure rating shown
Standard carbon-fiber LITE 45, 50, 68 and 90 cubic inches 4500 psi
SL2 68, 77 and 90 cubic inches 4500 psi

This is one maker’s published lineup, not a list of every tank sold. A tank’s volume label is not a shot-count promise. Marker efficiency, operating setup and regulator requirements differ, so do not estimate shots from the bottle size alone.

Before choosing a tank

  1. Check the marker manual for its approved air source and input requirements.
  2. Read the bottle’s volume and pressure rating from its label.
  3. Confirm regulator output, tank thread and marker compatibility with their makers.
  4. Compare the tank dimensions and weight with the marker and shoulder setup.
  5. Follow the cylinder inspection, filling and service instructions on the tank.

For a fuel-system comparison, read HPA vs CO2 for paintball. You can also compare paintball loader capacities and browse HPA tanks.

Source

Read the HPA tank markings checklist before comparing tank labels and manufacturer information.

Common questions

What does 68/4500 mean on a paintball tank?

It identifies a 68-cubic-inch tank with a 4500 psi rating in Ninja's product naming.

What paintball tank sizes does Ninja list?

Its standard carbon-fiber line lists 45, 50, 68 and 90 cubic inches. Its SL2 line lists 68, 77 and 90 cubic inches.

Does a larger tank always give a known number of shots?

No universal shot count follows from the tank label alone. Check the marker and air-system maker's specifications for your setup.

Will every HPA tank fit every marker?

Check the marker's air-system requirements and the tank regulator's compatibility before buying.